Tuesday, July 5, 2011

Applicant caught between inconsistent BPAI Decision and Petition Decision

Takeaway: The Examiner objected to originally filed drawings in the first Office Action on the merits (mailed in 2004), and the Applicant is still fighting the very same objection in 2011 – even after winning at the BPAI on the prior art rejections! What's worse, the Applicant is now caught between inconsistent direction from the PTO: the BPAI Decision said to petition the objections and the Petition Decision said to appeal the objections. The Applicant has now filed a Renewed Petition which explains this inconsistency. If the Applicant loses this time, the only recourse is to file a suit in district court. (Application of Frye, Appl. 10/790,923.)

Details:

Application of Frye
Application 10/790,923
Technology Center 3700

Frye's filed a patent application for a shoe in 2004. The first Office Action on the merits included two § 1.83(a) drawing objections:
The drawings are objected to under 37 CFR 1.83(a). The drawings must show every feature of the invention specified in the claims. Therefore, the midsole(s) must be shown or the feature(s) canceled from the claim(s). No new matter should be entered.The drawings are objected to because the specification states that 824 is a point at 1/2 the length of the shoe, however the point at 824 in figure 14 appears to be clearly in the forefoot portion of the shoe, this is confusing.
(Emphasis added.) 

The originally filed spec referred to a midsole, but did not use a reference number. So the Applicant responded by amending the spec and drawings to add reference number 829. The drawing amendment looked like this:

The Examiner was not satisfied. In the first Final Office Action he maintained the two drawing objections and also indicated that the drawing contained new matter:
These drawings are not entered because they contain new matter, i.e. the thickness, shape, exact location, etc. of the midsole is considered to be new matter.
(Emphasis added.)

The Applicant filed an RCE with claim amendments to address prior art rejections and also argued against the new matter objection. The Applicant addressed the second drawing objection ("824 points to the forefoot") by explaining that line 824 had been "repositioned so that it coincides with the midpoint of the sole." The Applicant traversed the new matter objection by pointing to specific sections of the specification to show support for "midsole."

The Examiner maintained all three objections. Later in prosecution, the Applicant argued that a midsole is known to a POSITA and is thus not new matter:
Moreover, midsoles are well known by those of skill in the art as shown in the various prior art documents submitted by Applicant and cited by the Examiner and as taken by the Examiner as Official Notice, in the Office Action. No unusual features have been attributed to the midsole provided in FIGURE 14 and described in Applicant's specification.
(Emphasis added.)
The Examiner did not respond to this particular argument.

The Applicant filed seven more responses and amendments dealing with prior art rejections before appealing, but no progress was made on the objections. In addition to the prior art rejections, the Appeal Brief addressed the drawing and new matter objections (repeating the arguments already on record).

In the appeal decision (Ex parte Frye), the Board reversed all the prior art rejections. The Board did not reach the drawing and new matter objections. Instead, the Board noted that objections are petitionable matters, and chastised the Applicant for not dealing with this sooner:
In general, since petitions should be made within two months of the mailing date of the action or notice from which relief is requested, 37 C.F.R. § 1.181(f), petitionable matters should be addressed before an appeal reaches the Board. In the present case, it would have been desirable for the Appellant to have resolved the objections to the drawings and refusal to enter proposed drawing amendments by petition prior to the matter reaching the Board.

When the application (with all rejections reversed) was returned to the Examiner, the Examiner issued an Ex parte Quayle Action maintaining the drawing and new matter rejections. The Applicant filed two more responses with the same drawings and the same arguments traversing the objections. Finally, in April 2011, the Applicant filed a Petition on the new matter and drawing objections, and simultaneously filed an RCE (but no claim amendments).

After the petition was filed, but before a petition decision was issued, the Examiner issued another Office Action in response to the RCE. This Office Action maintained the drawing objection but withdrew the new matter objection in favor of an enablement rejection:
The specification and drawings are confusing and inconsistent and therefore do not provide adequate basis to enable one of ordinary skill in the art to make the claimed shoe becuase it is not clear where the location of point 824 is to be located. The specification states "approximately 1/2 the length" however the drawings clearly show such a location to be in the forefoot of the footwear. One of ordinary skill in the art would not be able to determine which location is appropriate for the invention. Also the drawings do not show a midsole and one of ordinary skill in the art would not know what thickness, shape, exact location etc. would be appropriate. Therefore the specification lacks enablement for a midsole or the location of the point which the forward toe section of constant thickness of the insole meets the heel section of the insole with a decreasing thickness.

The Petition, which handled by the Technology Center Director, was dismissed on the grounds that the drawing objection was related to the enablement rejection and thus should be handled by the BPAI:
A review of the record indicates that the drawing objection and claim rejection are directed to the same issues. ...  [T]he correctness of the examiner's drawing objection, resting on the lack of clarity of the claimed the location of point 824 of midsole, is dependent on the correctness' of the examiner's 35 USC 112 first paragraph rejection of claims based on the original specification. It is the policy of the USPTO in appropriate circumstances to decline to rule on a petitionable issue, when, as here, that an issue is also determinative of a  rejection, and as such, is appropriate for consideration on appeal to the BP AI. In this case, the issue in the objection and rejection, as here, additionally and necessarily requires the exercise of technical skill and legal judgment in order to evaluate the facts presented, the issue is properly decided on the merits, and is properly reviewed on appeal, not petition. Under the circumstances, it is believed that the issues presented under the claim rejections and drawing objection in the instant case require the same review by the BPAI. Thus, this issue is appealable and should not be decided by petition.
(Emphasis added.)

On July 5, 2011, the Applicant filed Renewed Petition explaining that the Petition Decision was inconsistent with the BPAI's decision:

The Board invited Applicant to pursue this issue through petition and have this issue addressed before an appeal reaches the Board. The Board is stating that this issue is to be resolved by petition. See Decision on Appeal, page 18, lines 15-21.Thus, Applicant is caught in an endless loop where the issue is passed off from the Board to the Director and now apparently is to be passed backed to the Board which stated that the issue was not within its jurisdiction and thus not appealable. As a result, Applicant respectfully requests the Director to decide this issue pursuant to this Renewed Petition.
 My two cents: Petitions are generally useless to Applicants because a petition doesn't stop the 6-month statutory clock and petition decisions often take months if not years. Not true here, as the decision took only about 6 weeks. This case highlights a second problem with the petition process  – the confusion between issues that are appealable and issues that are petitionable, which can catch the Applicant in "an endless loop" between the two entities.

Technically, there is no endless loop. Technically, the BPAI decision and the Petition decision are not inconsistent, because they were deciding two different issues. The Petition considered an enablement rejection that wasn't present when the Applicant petitioned, because the landscape changed between the time the petition was filed and the time the petition was decided. That is, the Applicant petitioned the new matter and drawing objections (Office Action mailed September 22, 2010), but by the time the petition was decided the new matter objection had disappeared in favor of an enablement rejection (Office Action mailed April 21, 2011).

Still, this mere technicality has huge consequences for the Applicant. If the Director doesn't have mercy on the Applicant in the Renewed Petition, the Applicant is forced into a second appeal, which will take years.

On a comletely different note, the Applicant's behavior here simply baffles me. The Applicant waited seven years to file a petition which should have been filed after the first Final Office Action! Why did the Applicant continue to repeat the same argument over and over and over? Because he thought there was no penalty for doing so? Because he didn't know there was an alternative?

Maybe the Applicant was hoping that the objections would simply go away. I have seen a number of cases go to the Board with objections present, and when the BPAI decided in the Applicant's favor, the Examiner issued a Notice of Allowance. That is, the objection simply disappeared with no comment. But as this case shows, you're in trouble if the Examiner maintains the objection even when the claims are otherwise allowable. So after what happened here in Frye, perhaps Applicants should consider filing petitions more often, at least when it's clear that the Examiner is entrenched in his position.

I also wonder if the Applicant dodged a bullet here by waiting so long to file the petition. Rule 1.181 says that petitions that are not "filed within two months of the mailing date of the action or notice from which relief is requested may be dismissed as untimely." It's not clear to me whether the action from which relief is requested is the very first Office Action in which the objection is raised, or whether it's the latest action maintaining the objection. I'd like it to be the latter, since that's more lenient for Applicants. Yet if the two month time period renews every time you get an Office Action, I don't really see the point of a two month time period, since that would allow me to wait (almost) indefinitely to file a petition.

It would have been nice if the Examiner had issued an enablement rejection from the start rather than new matter. The Board would have decided the issue, and that would be that. On the other hand, the Applicant did amend the spec, so this might be one of rare cases where a new matter objection is appropriate. This case illustrates why you don't want to amend the spec to add literal support for your claims: it's easier to appeal an enablement rejection than to petition a new matter rejection.


15 comments:

  1. Karen -- nice catch on this one, but really, would you have filed a petition after the first Final Office Action?

    If I filed a petition on every Office Action (final and non-final) and every Examiner's Answer that deserved one, I would have probably filed a thousand petitions by now -- that is not an exageration. I'll always argue an objection (if warranted) and by the time the case is allowed, these objections always find a way of disappearing.

    However, I do agree with the advice against amending the specification/drawings. Amending the specification/drawings is an easy way out, but it can cause more problems than what it solves.

    Also, why do Examiners make an objection when a rejection is what should be made?

    "I'd say the Applicant dodged a bullet here because the rule says that petitions 'should be' filed within two months."
    I disagree. Each time the objection gets raised in a new Office Action, you get another chance to petition it. No bullet dodged.

    Finally, I'm glad to see that the left hand at the USPTO knows what the right hand is doing --- NOT. Ultimately, this is what is called ... "I don't want to deal with this issue, you deal with it .... no, I don't want to deal with it, so YOU deal with it." Put differently, this is just the BPAI/Petition's branch just showing off their respective laziness. You can be sure the phrase "the buck stops here" is one that is never uttered in the halls of the Alexandria campus.

    ReplyDelete
  2. The applicant is not caught in an "endless loop" between the Board and Petitions. In the earlier appeal, there was no Section 112 rejection. Now there is.

    ReplyDelete
  3. >applicant is not caught in an "endless loop"

    Thanks for the comment. Technically true, though the end result (another trip to the BPAI) is the same. I revised my post to discuss this.

    ReplyDelete
  4. What is hilarious about this case is that it was inappropriately rejected in the first place and that when the objections are actually properly resolved he will earn himself a rejection over the art applied in the board case.

    The examiner, (a she iirc) wrote in horrible english and did not put down the best grounds of rejection iirc. She should have done a miyazaki to show the two different interpretations that the claim was amenable to ivo the originally filed spec/drawings. And then, once applicant came in and rectified that situation then the art rejections would magically be clearly applicable, gasp.

    Still, it was applicant's blunder in response to the examiner's blunder that compounded the problem into the monstrosity you see today.

    "but really, would you have filed a petition after the first Final Office Action?
    "

    You have to don't you? If you want your patent that is. Otherwise you're left with a quayle.

    What people don't seem to understand is that the examiner was, in this case, trying to force the applicant to concede the art rejections were valid by objecting to the improper placement of the "point" in the amended drawings. Iirc. The objections were really one of the most important parts of this whole case. I would have used a miyazaki also, but meh, whatever gets the job done.

    Also Karen I don't think the director CAN take mercy on the applicant. How would they do that other than simply issuing the patent themselves? Issue an improper petition decision? No can do on that front.

    "On a comletely different note, the Applicant's behavior here simply baffles me. The Applicant waited seven years to file a petition which should have been filed after the first Final Office Action! Why did the Applicant continue to repeat the same argument over and over and over? Because he thought there was no penalty for doing so? Because he didn't know there was an alternative?
    "

    Because if he has to amend his drawings appropriately he will lose the art rejection. Wait and see. The director inappropriately decided the Frye case based on the amended (and objected to) drawings instead of the original disclosure. If the board had done its job properly they could have ended the nonsense in this case just the same as the examiner/applicant could have.

    What really takes the cake about this case is that at the end of the day the examiner still hasn't properly done his job on this application, after several years. The enablement rejection reads like a 112 2nd and I'm betting there is no Wands factors and his cursory explanation is woefully insufficient to support an enablement rejection.

    This is simply a case of an examiner not knowing about miyazaki and how to use it.

    ReplyDelete
  5. "Also, why do Examiners make an objection when a rejection is what should be made?"

    Well, some examiners do that because they don't know when to properly object and when to properly reject.

    Others do it because they are making a mistake on that day.

    Others don't make those mistakes.

    ""the buck stops here" is one that is never uttered in the halls of the Alexandria campus. "

    I say it all the time. Along with another favorite of mine "the nonsense stops here".



    Lulz, I just saw this:

    "It is the policy of the USPTO in appropriate circumstances to decline to rule on a petitionable issue, when, as here, that an issue is also determinative of a rejection, and as such, is appropriate for consideration on appeal to the BP AI. "

    I had not ever heard that. When did they decide on policy grounds to ignore the distinction between petitionable wholly procedural issues and issues of substance?

    Maybe if the examiner could correctly write up his grounds of objection/rejection then this case wouldn't be so fed.

    ReplyDelete
  6. Still, I look forward to the day that the applicant either abandons or amends his drawings properly. Because I want to see Kappos's debut decision go up in a flame of futility after he put absurd notions in the minds of Oetikertards leading to the Jung situation.

    ReplyDelete
  7. "This is simply a case of an examiner not knowing about miyazaki and how to use it."

    Miyazaki -- that case in which the BPAI (hence the USPTO) changed the substantive law with regard to 112, 2nd paragraph?

    All it is going to take is one frustrated Applicant to the Federal Circuit to remind the USPTO what power an executive branch of the government has to change/interpret substantive law -- let me give you a hint, it starts with "z" and ryhmes with "hero."

    ReplyDelete
  8. "leading to the Jung situation."

    6 -- I've read the office action that was the subject of appeal in Jung. If you write you office actions like this, you are to be commended.

    However, from my experience, I see an Office Action of that quality (or better) less than 5% of the time. The attorneys/applicants of Jung were idiots to take that issue to the Federal Circuit.

    ReplyDelete
  9. "The specification and drawings are confusing and inconsistent and therefore do not provide adequate basis to enable one of ordinary skill in the art to make the claimed shoe becuase it is not clear where the location of point 824 is to be located."

    Yet where does the Examiner actually make a determination of level of skill? Nowhere! Where does the Examiner provide any evidence that the Examiner has even a clue as to what the level of skill in the art is? Nowhere!

    "The specification states "approximately 1/2 the length" however the drawings clearly show such a location to be in the forefoot of the footwear. One of ordinary skill in the art would not be able to determine which location is appropriate for the invention."

    And how are we to know, much less the Examiner, what the person of ordinary skill would not be able to do since the Examiner FAILED to set forth any evidence of skill level to support the assertion.

    "Also the drawings do not show a midsole and one of ordinary skill in the art would not know what thickness, shape, exact location etc. would be appropriate."

    Really? Considering the Examiner never bothered to make any skill level determination analysis, the Examiner is pretty much pulling this from out of the business end of his gastrointestinal tract.

    "Therefore the specification lacks enablement for a midsole or the location of the point which the forward toe section of constant thickness of the insole meets the heel section of the insole with a decreasing thickness."

    Therefore the Examiner has only stated conclusions bereft of any evidentiary support and has no clue as to what he is talking about.

    ReplyDelete
  10. "All it is going to take is one frustrated Applicant to the Federal Circuit to remind the USPTO what power an executive branch of the government has to change/interpret substantive law -- let me give you a hint, it starts with "z" and ryhmes with "hero." "

    And I look forward to it. Indeed, I try to generate such a case at least once a month. To no avail.

    The Jung Answer and Final weren't all that and a bag of chips so far as I'm aware. The examiner could have done more to persuade the applicant of his position. It may have been all that, but it certainly wasn't a bag of chips also.

    ReplyDelete
  11. "Therefore the Examiner has only stated conclusions bereft of any evidentiary support and has no clue as to what he is talking about."

    Agreed. This is the typical lame non-enablement rejection I see. No evidence and no analysis. Only conclusions. If applicant's representative can't blow this sh!tty rejection out of the water, than applicant doesn't deserve a patent.

    ReplyDelete
  12. IIRC the BPAI, in overturning the rejection, cited the drawing as showing the point where the slope changes, and relied on it to the point of overcoming the rejection. The decision set precedent. I don't understand how, if the drawing was clear enough for the Board to rely on, the Examiner can now say pointing to the features discussed by the Board as being clearly present is "new matter."

    ReplyDelete
  13. "I don't understand how, if the drawing was clear enough for the Board to rely on, the Examiner can now say pointing to the features discussed by the Board as being clearly present is 'new matter.'"

    Lulz. Don't you understand the examiner mindset?

    When drawings are in an application, they can't be relied on for anything unless the applicant describes in painstaking detail every facet of the drawings.

    However, once the application is published or allowed, the resulting publication/patent is searchable and citable. Then, magically, the drawings can be relied upon to show everything somebody else is claiming, even if the features being claimed aren't described in the publication/patent or even hinted at.

    It's like magic.

    ReplyDelete
  14. One central problem is that the Petitions Office runs like a completely insulated, unanswerable division within the PTO. They are very slow, non-responsive, and come up with the interpretations of the law that are not followed elsewhere at the PTO.

    ReplyDelete
  15. >[Petitions Office] come up with the >interpretations of the law that are not
    >followed elsewhere at the PTO.

    Hmm. Didn't realize that, due to another fundamental problem with the Petitions Office: petition decisions aren't searchable like BPAI decisions are.

    Only the small fraction of petitions that reach "final agency status" (?) are in the searchable petitions database. (Final agency means you "appealed" a negative petition decision by filing another petition at a higher level (the Director?) asking for reconsideration.)

    Otherwise, individual petitions are available through public PAIR. But I can't search PAIR for "petition decisions involving a new matter objection".

    I'll point out a small technicality: AFAIK, only a few types of petitions are handled by "the Petitions Office." Many petitions of particular interest to prosecutors (e.g, Frye's drawing objections) are instead handled by the Tech Center.

    Not sure why petitions are so slow. There is not statutory or regulatory mandate that Office Actions get out in a certain time period, yet internal PTO procedures (ie, Examiner docketing rules) insure that they do. Why isn't something similar used for petitions?

    ReplyDelete